Conveyor equipment selection specification motor feeder feeder 
 Equipment selection 

 1 to determine productivity: The inertia of self-synchronous vibrating feeder series is based on the productivity of river sand as the standard material given (heap accounting for 1.6T/m3). When the proportion of material greater than 1.6T/m3 heap, its rated output can be selected; when the proportion of material in 1.2 ~ 1.6T/m3 heap, its output can reach the rated output of 0.9 ~ 1.0 times. When the proportion of the material in the 0.8 ~ 1.2T/m3 heap, its output can be off to a rating of 0.8 to 0.9 times. Bulk density is less than 1.6T/m3 material, the material thickness must be increased in order to increase production. 
 Difficult for feeder transport material (such as talc, titanium dioxide, clay, flour, clay, etc.), and large water content hydrophilic materials, production shall be determined by experiment. Necessary, tilt the tank properly installed (usually downward sloping 10 to 15 degrees) to increase the feeding amount. 
 (2) the choice of control box: supporting the feeder series for the reverse brake control box control box, which enables feeder when stopping, quick stop, so that the feeder rapidly through the resonance zone, to avoid too large amplitude of the machine damage. The control box has the over-current, over voltage, off equal protection, and the other according to process requirements, increased braking, feeding speed, remote control and variable speed functions. Please specify when ordering. 
 3 feeder conditions of use: 
 (1) the ambient temperature does not exceed +40 ℃; 
 (2) at ambient temperature of 20 ± 5 ℃, the relative humidity of the surrounding medium is not more than 85%; 
 (3) no serious corrosion and impact on the surrounding electrical insulation medium. 
 4, such as encountered in the selection of the width of distance constraints, consider the installation of the vibration motor to the rear, reducing the width of the size. 
 The company has material handling machinery research institutes and research centers materialized. April 1969 produced China's first electromagnetic vibrating feeder, first developed in 1980 and the first domestic production of motor feeder. Company covers an area of ??286,000 square meters. A variety of production equipment 629 pieces (sets), which metal cutting equipment 168 pieces (sets), test equipment 276 pieces (sets), which has advanced far-infrared electromagnetic coil vacuum dipping and drying production line, there is the largest 200t / h feeding machine test stand and test equipment. The company existing staff more than 1,600 people, average level of intermediate technology, engineering and technical personnel 213 people (including 28 senior titles, intermediate grade 125, junior 60) Company fixed assets 88 million yuan, net present value 33.48 million yuan. 2003 sales revenue 58,600,000 yuan, total profit of 1.37 million yuan. The main products are various forms of vibrating feeder, coal feeder, vibrating screen, warehouse wall vibrators, vibrating motor; bucket elevator: Spiral, en masse, belts, impellers, discs, rigid impeller, apron feeder; closed gate, crusher and other products were more than 400 specifications, the products sell well in more than 30 provinces, municipalities and autonomous regions and exported to Europe, Asia, Africa, 27 countries and regions.