GZG motor vibrating feeder, motor vibrating feeder manufacturers, motor vibrating feeder configuration 
 Equipment selection 

 Productivity to determine: This series of self-productivity of synchronized inertial vibration feeder is the river sand is given as the standard material (Bulk density for 1.6T/m3). When the material heap is greater than the proportion of 1.6T/m3 its production according to the rating selected; material proportion of the heap in the 1.2 ~ 1.6T/m3, its production could reach 0.9 to 1.0 times of the rated output. When the material Bulk density of 0.8 ~ 1.2T/m3, with its output rating of 0.8 to 0.9 times. Material Bulk density is less than 1.6T/m3 shall be appropriately increased material thickness to increase production. 
 The vibrating feeder is difficult to transport materials (such as talc, titanium dioxide, white clay, flour, clay, etc.), as well as moisture hydrophilic material, should be determined according to the test output. The tank when necessary, appropriately installed (usually downward sloping 10 to 15 degrees) in order to increase the feeding. 
 Control box options: This series of supporting feeder control box for the reverse brake control box, it allows the feeder to stop, fast stop, so that the feeder rapidly through the resonance region, to avoid large amplitude machine damage. The control box has over-current, over voltage, under voltage protection function, the other based on process requirements, to increase the dynamic braking, speed feed, remote control and variable speed. Please specify when ordering. 
 Feeder conditions of use: 
 (1) the ambient temperature does not exceed +40 ℃; 
 (2) in an ambient temperature of 20 ± 5 ℃, relative humidity of the surrounding medium is not greater than 85%; 
 (3) are not in serious corrosion and affect the electrical insulation medium. 
 (4) such as encountered in the selection space distance limit the width may be considered a vibration motor to rear installation, reduce the width dimensions. 
 Hebi City of Atlanta General Machinery Co., Ltd. (formerly Electrical and Mechanical Services Department Hebi machinery plant), was founded in 1956, after forty years of unremitting efforts, is to develop the two enterprises in Henan Province, the largest bulk material handling equipment production base, power station auxiliary equipment (plant) the designated manufacturers.